ObjectDB Database Search

Heap Limit reached although the option 'objectdb.temp.page-file' is activated

Trying to generate a new activation code using our site license key gives a 500 error every time. Code generated using version 2.7.4_04 and openjdk 1.8.0_171. spiffy Jonathan Harley There was a problem, thank you for this report. Please try again now. support Support

the hardware. If you can publish diagnosis info of the slow activity it might help. support Support Thank ... a Megaraid controller with activated cache. I have attached a screenshot of the measured speed ... read activity when the system is warm - you shouldn't if the entire database is cached

to understand what activity is done during these 3 seconds. support Support I will prepare test application ... all activations from the objectdb.conf file. With an OEM license your end users do not need activation codes, and you should avoid including activation codes in your distributed application. Maybe checking

JQL-Update Queries fails with activated L2-Cache

) { } // Possible states are: " activate ", "hide","showDisabled" function Babylon_SetCorrectionState ... _GetCorrectionText.style.cursor = (state == " activate " ? "hand" : "default"); BABID_GetCorrectionText.style.color = (state == " activate " ? "black" : "#C5C5C5"); BABID_GetCorrectionImg.style.filter = (state

when a transaction is active . In principal The SF doesn't need to begin any transaction since it only get called ... ; [org.jboss.as.configadmin] (ServerService Thread Pool -- 26) JBAS016200: Activating ConfigAdmin ... ) JBAS010280: Activating Infinispan subsystem. 13:52:02,011 INFO  [org.jboss.as.osgi

enables activation of one machine, but after activating that machine you can run ObjectDB in both client ... need to do any type of configuration for embedded mode so that it will use the activation properly? kzimmerman Kari Zimmerman Just make sure that you run activation on the machine on which you plan

.clustering.infinispan.subsystem] (Controller Boot Thread) Activating Infinispan subsystem. 13:49:23,900 INFO [org.jboss.as.naming] (Controller Boot Thread) Activating Naming Subsystem 13:49:23,954 INFO [org ... .osgi] (Controller Boot Thread) Activating OSGi Subsystem 13:49:24,188 INFO [org.jboss.as.security

entity is an instance with a persistent identity that is not (or no longer) associated with any active ... it is associated with an active persistence context. Modifications to the state of entities associated ... when the entity manager is joined to an active transaction, the persistence context remains managed

;  at com.objectdb.jpa.EMImpl.commit(EMImpl.java:289)     at db. Activator .storePoints( Activator .java:34)     at FelixProject.ExampleServlet.doGet(ExampleServlet.java:21 ... ; ! Failed to start bundle FelixProject-0.0.0.201806081311, exception activator error Failed to commit

to the recent one. We don't observe any issues caused by the failing index activation and we don't ... one. We don't observe any issues caused by the failing index activation and we don't expect ... activation by using a special configuration with index-update disabled . support Support Currently

(*). If I create a new activation code for my objectdb.conf it will be valid sometimes for 2 hours ... — introduced important improvements related to licence activation . support Support sorry for my delayed ... and validating the activation code in 2.9.3? My currently problem (only on this Apple Macbook M1

. Please note: I have had to activate odb a few times. rvxTeam2 Eugene Brobby Apparently you added the activation code to the objectdb.conf file that is in use by your application (and this is why it works ... . The location of the active configuration file is relative to the location of the objectdb.jar file, as

objectdb version. We had to create new keys multiple times because of the unstable activation ... ! Kevin Kevin Pfaff Only changing MAC addresses should  require re- activation , so it is likely ... addresses in your new activations today confirm that these are new MAC addresses. Past activation

-view=false kadirbasol Kadir BASOL It is unclear from your post why the activation does not work, but the usual reasons are issues with setting the configuration and invalid activation codes. SpringBoot should work like any other application regarding the activation , but maybe you should try first

the database) and we have the proper  activation key set in objectdb.conf file. Caused by: com ... . Also the network interface was not changed. But from some moment old activation key stopped working ... of them. They are all independent services running with it's own objectdb.conf. So we added the new activation key

INFO [org.jboss.as.configadmin] (ServerService Thread Pool -- 26) JBAS016200: Activating ConfigAdmin ... ) JBAS010280: Activating Infinispan subsystem. 04:56:02,084 INFO [org.jboss.as.naming] (ServerService Thread Pool -- 38) JBAS011800: Activating Naming Subsystem 04:56:02,087 INFO [org.jboss.as.security

-- 26) JBAS016200: Activating ConfigAdmin Subsystem 08:17:22,252 INFO [org.jboss.as.security] (ServerService Thread Pool -- 44) JBAS013101: Activating Security Subsystem 08:17:22,253 INFO [org.jboss.as.osgi] (ServerService Thread Pool -- 39) JBAS011940: Activating OSGi Subsystem 08:17:22,253 INFO

above: transaction is active . So, for some reason, I'm getting these 3 errors repeatedly. David   ... when a transaction is active (error 612) at com.objectdb.jpa.EMImpl.begin(EMImpl.java:275) at javax ... is active at com.objectdb.o.MSG.d(MSG.java:62) at com.objectdb.o.OBC.D(OBC.java:1513) at com.objectdb.o

the assignment requirements accordingly. On our side we can increase the activation limits to enable repeating activations on upgrades, but unless you write code to automate activations (i.e. run the Activator from a program, open the result link from the program, parse the activation code, etc.), or

() )    System.out.println( methodName + " is within an active transaction" );   else    System.out.println( methodName + " is out of an active transaction" ); } private List ... ; [stdout] (http--127.0.0.1-8080-1) persist is within an active transaction 18:51:18,219 INFO 

regards Arne Arne Arne Stocker You can check if activation is working using a query:     ... activation ", boolean.class).getSingleResult()); It will not tell you the mode (i.e. OEM ... activation , i.e. if a valid OEM activation code was found in the configuration file: 

would not start at all, when no valid activation key is present, throw some exception, so we could stop ... is activated or not using the following query: boolean isActivated =    em.createQuery("objectdb activation ", boolean.class).getSingleResult(); Then you can avoid using ObjectDB and generate

corruption is usually an external activity , such as copying a database file while it is active ... recovery file. However, it is also possible (although extremely rare) that the specific activity in ... for the active time zone. Rebuilding the database file with the ObjectDB Doctor (which rebuilds

/update suggests should not work. First, I've been modifying managed entities from outside an active ... been modifying managed entities from outside an active transaction.  If I subsequently begin ... is to update entities within an active transaction, or update entities outside the transaction

1st project)) INFO: RequestBean []: Created: com.greensoft.entity. Activity [null](TEST: the 1st activity ) INFO: RequestBean []: Persisted: com.greensoft.entity. Activity [14](TEST: the 1st activity ) INFO: RequestBean []: Created: com.greensoft.entity. Activity [null](TEST: the 2nd activity ) INFO

manager that a JTA transaction is active and join the persistence context to it. This method should be called on a JTA application managed entity manager that was created outside the scope of the active ... it with the current JTA transaction. Throws: TransactionRequiredException - if there is no active transaction Since: JPA 1.0

with an active transaction, and call the given function, passing the EntityManager to the function ... application-managed EntityManager with an active transaction, and execute the given function, passing

: TransactionRequiredException - if there is no active transaction or if the entity manager has not been joined to the current transaction IllegalArgumentException - if a transaction is active but the given instance is not a managed entity Since: JPA 2.0

.persist is called and the entity already exists. The current transaction, if one is active ... may be thrown at flush or commit time. The current transaction, if one is active and the persistence context

the database. The current transaction, if one is active and the persistence context has been joined

part of an API call, at, flush or at commit time. The current transaction, if one is active

at commit time. The current transaction, if one is active , is marked for rollback. Since: JPA 2.0 Public

at commit time. The current transaction, if one is active , will be marked for rollback

the current transaction, if one is active , to be marked for rollback. See Also: Query.getSingleResult

, if one is active , to be marked for rollback. See Also: Query.getSingleResult () TypedQuery.getSingleResult

, and QueryTimeoutException , cause the current transaction, if one is active and if the persistence context

when a transaction is required but is not active . Since: JPA 1.0 Public Constructors

out and only the statement is rolled back. The current transaction, if one is active , will be not

is unspecified. If there is no transaction active or the persistence context is not joined

JPA Method in jakarta.persistence.EntityManagerFactory void runInTransaction (   Consumer  work ) Create a new application-managed EntityManager with an active transaction, and execute the given function, passing the EntityManager to the function. If the transaction type

JPA Method in jakarta.persistence.EntityManagerFactory R callInTransaction (   Function  work ) Create a new application-managed EntityManager with an active transaction, and call the given function, passing the EntityManager to the function. If the transaction type

JPA Method in jakarta.persistence.EntityManager boolean isJoinedToTransaction () Determine whether the entity manager is joined to the current transaction. Returns false if the entity manager is not joined to the current transaction or if no transaction is active . Return: boolean Since: JPA 2.1

manager is joined to an active transaction, the persistence context remains managed until the transaction

I have a base class: public abstract class HotObject extends BaseObject { private Integer activity ; protected HotObject() { activity = 1; } public Integer getActivity() { return activity ; } public void setActivity(Integer activity ) { this. activity = activity ; } public void increaseActivity

is thrown? Any other special activity at that time? Please post a full stack trace of the exception (strange ... we have it now 5-10 times per day. There is not any backup activity active during these times. It always happens ... is enabled for all loggers, which is the default). support Support thanks, version is active , we wait

(working): import com.objectdb. Activator import groovy.transform.CompileStatic @CompileStatic class Activation { static void main(String[] args) { PipedOutputStream piped = new PipedOutputStream() System.setIn(new PipedInputStream(piped)) Thread.start { Activator .main(args) } sleep(100) piped.println

is not caused by any specific activity , we run more or less the same queries all day.  The 80% cpu ... adds more and more active threads. Maybe your system has a component that when a query doesn't ... requests before hitting ObjectDB? You can probably identify that activity in your log files (or in

, just no activity for hours (0 processor usage), no error message, nothing   hgzwicker Hans ... that you describe, is that only active if a doctor 2.7.1 was run before ? Are we after the doctor 2.7.1 repair of last week in a state where the fix is active ? we are probably not able to use the recording as